Series


Characteristics & application

Luxcor
100

This is a general use product with good solvent resistance.   It can be used in paints and plastics, such as PVC and LDPE.  It has excellence daylight and UV fluorescence.

Luxcor
200

This product has good pigmenting power and can be used in plastics and paints.  Due to its solvent resistance can be used to manufacture vinyl and polyurethane based paints without causing storage problems.  It is also indicated for use in flexible PVC and plastisol once has a good resistance to bleeding.

Luxcor
300

Product is suggested for aqueous pigment dispersions for use primarily in textiles.  It has excellent coverage and pigmenting power.  Indicated where solvent resistance is not required.

Fluorplast
410

Indicated for polymer processing at higher temperatures, there is no odor of formaldehyde.  For use with LDPE, HDPE, PS, PP, EVA, etc.

Fluorplast
420

Product based on a polyester polyamide resin with excellent thermal resistance suitable for polymers like polyolefin, polystyrene, polyamide, etc. It has low plate out and easy dispersibility during polymer processing. A minimum temperature of 150 ºC is suggested to assure a good dispersion.  Product can be used at temperatures up to 280ºC, depending on the cycle duration, keeping stable fluorescence and colors. Colors can be mixed up to achieve intermediate shades.

Luxcor
500

Product soluble in polar solvents, can be used in special applications such as fluorescent varnishes, flexographic inks, etc.  Must be blended to obtain intermediary colors.  For indoor applications only.

Fluorcolor
2200

Fluorcolor 2200 has an excellent pigmenting power and can be used in plastics and paints.  It has a high solvent resistance and can be used to manufacture vinyl, polyurethane and other paints which uses strong solvents.  It is also indicated for use in flexible PVC plastisol and PU laminates without bleeding.

Fluorcolor 2700

Product is a aqueous dispersions and has an excellent pigmenting power. Can be used  in a wide range of aqueous formulations including waterborne coating, water based inks, paper coatings, latex balloons, etc. Its cross linked polymeric matrix avoid bleeding in textile inks and gives a good wash resistance. Dispersion has approximately 45% of fluorescent pigment.